Opti-Coat is a hard wearing, ceramic clear coat for superior resistance to scratching (9H) and protection from chemical etching due to environmental impacts. The Opti-Coat pre-polymer cross links, and forms a continuous protective film on the painted surface it is applied to, similar to a single component isocyanate that forms a clear coat finish. Opti-Coat has better chemical resistance, scratch & mar resistance, and release properties than any automotive paint coating in use. It provides permanent protection for all modern factory paints and can also be used to protect metal and hard plastic surfaces.
Opti-Coat is not a paint protection wax or sealant that will wash away, or break down over time. Opti-Coat bonds permanently with the factory coating, protecting the surface indefinitely and will not delaminate. A single layer of Optimum Clear Coating measures approximately 2 microns in thickness. When compared to other paint protection products, Opti-Coat is more than 100 times thicker, with tests showing a wax coating measuring less than 0.02 microns. This allows Opti-Coat to effectively absorb damage that would otherwise affect the factory paint layers. Swirl marks and light scratches are not only decreased by the harder Optimum Ceramic Coating, the factory paint is protected and preserved. Opti-Coat is completely resistant to acidic environmental substances such as bird droppings. Unlike your factory clear coating that can be permanently damaged, Opti-Coat will not etch or dissolve when in contact with these substances, and a clean, glossy clear coating is maintained.
Opti-Coat will provide the owner with a superior clear coat film and the most advanced paint protection product in the marketplace, that is resistant to chemical etching, and harder than factory clear coatings to reduce swirls and scratches.
Opti-Coat will provide the owner with a permanent hydrophobic surface that is easier to clean, and stays cleaner for longer!
By maintaining a quality finish using the Optimum Clear Coating, you’ll also maintain a solid resale value when it comes time to upgrade to a new vehicle.
Opti-Coat works by bonding to your factory clear coating and becoming a permanent part of your vehicles paint system. Just like the clear coat bonds to the base coat, Opti-Coat bonds chemically to the clear coat. Initially, the technician will assess the paint work for defects and contamination. All surface contamination and any necessary defects are removed. Once this stage is complete, the paintwork is prepped and cleaned using an alcohol based cleaner and ready for coating. The Optimum Clear Coating is mostly self leveling. Any high spots are manually leveled by the technician to produce an even coat. Once complete, the surface is touch dry within 30 minutes. The Optimum Clear Coating continues to cross-link and harden. Within 12 hours it is resistant to liquids such as water and can be driven as normal by the client. Opti-Coat will then continue to harden over the next 30 days as it is exposed to heat.